Warranty: | 2 Years |
---|---|
Nature of Source Flow: | Passive inverter |
Phase: | Single |
Still deciding? Get samples of US$ 140/Piece
Request Sample
|
Suppliers with verified business licenses
Introducing the HC Series Pure Sine Wave Inverter from Ningbo Star The Force International Trade Co., Ltd. This multifunctional inverter combines a charger and automatic AC transfer switch, delivering a high conversion rate of up to 88%. With power factor correction, multi-stage charging, and pure sine wave output, it offers exceptional peak power to handle inductive loads safely. In the event of a mains AC power outage, the inverter's transfer relay seamlessly switches the load to its output, ensuring continuous power supply. When AC power is restored, the relay reconnects, smoothly transferring the load back to the mains AC.
MODEL(HC) | 1kw | 1.5kw | 2kw | 3kw | 4kw | 5KW | 6KW | ||
Continuous Output Power (W) |
1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | ||
Rated input voltage | 12VDC/24VDC/48VDC | 12VDC/24VDC/48VDC | 24VDC/48VDC | ||||||
Mains mode specifications: | |||||||||
Input voltage waveform | Sine wave (mains or generator) | ||||||||
Rated input voltage | 100V/ 110V/ 120V/220V/230V/240Vac | ||||||||
Low voltage shutdown point |
92/ 184Vac:4% | ||||||||
Low pressure recovery point |
97/ 194Vac :4% | ||||||||
High voltage shutdown point |
127/253Vac:4% | ||||||||
High pressure recovery point |
121/243Vac:4% | ||||||||
Maximum AC input voltage |
135/270V rms | ||||||||
Rated input frequency | 50Hz/ 60Hz (automatic detection) | ||||||||
Low voltage recovery point frequency |
40.5+0.3Hz ; | ||||||||
Low voltage cut-off point frequency |
40+0.3Hz; | ||||||||
High voltage recovery point frequency |
69.5+0.3Hz; | ||||||||
High voltage cut-off point frequency |
70+0.3Hz ; | ||||||||
Output voltage waveform | Consistent with the input voltage waveform | ||||||||
Overload protection | Circuit breaker start | ||||||||
Short circuit protection | Circuit breaker start | ||||||||
Power Efficiency | >95% | ||||||||
Conversion current | 30A | ||||||||
Conversion time (Ac to Dc) |
10ms | ||||||||
Bypass switching current | Yes | ||||||||
Bypass maximum load current |
30A | ||||||||
Output voltage waveform | Sine wave | ||||||||
Power factor | 0~1.0 | ||||||||
Rated output voltage (V) | 120/230Vac | ||||||||
Rated output frequency (Hz) |
60/50Hz :0.3Hz | ||||||||
Automatic tracking main frequency (Hz) |
Yes (from the first connection) | ||||||||
Output voltage range | :2% rms | ||||||||
efficient | >80% | ||||||||
Overload protection (SMPS load) |
(110%<load<125%) :10%: disconnect the output voltage after 15 minutes (125%<load <150%) :10%: disconnect the output voltage after 10 seconds Load >150% :10%: Disconnect the output voltage after 20 seconds |
||||||||
Peak capacity( 10s) | 3000VA | 4500VA | 6000VA | 9000VA | 1200VA | 15000VA | 18000VA | ||
start the motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP | ||
Short circuit protection | Current limit (power off after 10s) | ||||||||
Circuit breaker size | 15A | 20A | 30A | 40A | |||||
Rated DC input voltage | 12V / 24V/48V | ||||||||
Minimum DC terminal voltage |
10V/20V/40V | ||||||||
Undervoltage warning | 10.5Vdc :0.3Vdc (12V power supply) | ||||||||
DC input voltage is too low, automatic power off |
10.0Vdc :0.3Vdc(12V power supply) | ||||||||
Input overvoltagewarning and power failure |
16Vdc :0.3Vdc (12Vpower supply) | ||||||||
Input overvoltage recovery |
15.5Vdc :0.3Vdc(12V power supply) | ||||||||
Power saving | load <=2W | ||||||||
Inverter dimensions | 360*185* 180mm | 420*185* 180mm | 597* 195* 190mm | ||||||
(Length*width*height) | |||||||||
Packing size (length*width*height) |
520*315*305 | 580*315*305mm | 760*325*310mm | ||||||
Inverter weight | 13.5KG | 14KG | 17KG | 21KG | 27KG | 29.5KG | 30.5KG | ||
Packing operating weight | 15.5KG | 15.5KG | 19KG | 23.5KG | 29.5KG | 31.5KG | 32.5KG | ||
Standard warranty | 2 years |